Grenade range templates.
Print at 100% scaling, 72DPI. Once printed, check that the grid lines are at 1" spacing.
Once you have declared a throw, put the template down. These are designed to be placed so that the paper template is at a right angle to the table top.
Put the left of the chart against the base of the thrower. Then tear or cut the template until it fits around the terrain.
Make sure that the left to right grid lines are horizontal (no tilting for extra range!)
Target is in range provided that the target is within one of the curves. Important note here is "within". If you throw slower, you will get less height and less range - for example, all of the S3 curves are available to the S4 thrower, S2 would be smaller again.
Note that only a few sample curves are shown - you will have to use your imagination if the exact range falls between one of the curves shown.
Roll to hit as usual.
Print at 100% scaling, 72DPI. Once printed, check that the grid lines are at 1" spacing.
Once you have declared a throw, put the template down. These are designed to be placed so that the paper template is at a right angle to the table top.
Put the left of the chart against the base of the thrower. Then tear or cut the template until it fits around the terrain.
Make sure that the left to right grid lines are horizontal (no tilting for extra range!)
Target is in range provided that the target is within one of the curves. Important note here is "within". If you throw slower, you will get less height and less range - for example, all of the S3 curves are available to the S4 thrower, S2 would be smaller again.
Note that only a few sample curves are shown - you will have to use your imagination if the exact range falls between one of the curves shown.
Roll to hit as usual.